Digital Photo Archive | University of Nebraska–Lincoln

Skip to main content

In research sponsored by the U.S. Army Engineer Research and Development Center, the University of N

231012_EV_Crash_131A

The Rivian truck has decals affixed to the sides and top to make it easier for the data to be used t

231012_EV_Crash_052

In research sponsored by the U.S. Army Engineer Research and Development Center, the University of N

231012_EV_Crash_249

Trevor Donahoo, Engineering Testing Technician, connects testing equipment inside the Rivian R1T cab

231012_EV_Crash_024

The Rivian truck has decals affixed to the sides and top to make it easier for the data to be used t

231012_EV_Crash_075

Graham Kaufman, doctoral student in electrical engineering, poses with the Leybold ultra-high vacuum

231010_ Kaufman_270_0

Craig Zuhlke (left), Associate Professor of Electrical and Computer Engineering; George Gogos (back)

231010_Laser_150_0

George Gogos Professor and Associate Chair for Graduate Studies and Research and Co-Director, Center

231010_Gogos_285_0

Craig Zuhlke poses with the Leybold ultra-high vacuum laser surface processing and materials analysi

231010_Zuhlke_260_0

The new Amplitude laser in the Center for Electro-optics and Functionalized Surfaces in the Engineer

231010_Laser_030_0

Maryam Sule and Derick Vasquez are both chemical engineering majors pose for the College of Engineer

Maryam Sule and Derick Vasquez are both chemical engineering majors pose for the College of Engineer

Shannon Bartelt-Hunt, the Donald R. Voelte Jr. and Nancy A. Keegan Chair of Civil Engineering, will

230915_Bartelt-Hunt_038

Shannon Bartelt-Hunt, the Donald R. Voelte Jr. and Nancy A. Keegan Chair of Civil Engineering, will

230915_Bartelt-Hunt_029

Emily Ciesielski, left, and Jillian Weland, both freshman from Omaha, look over the robotic drilling

230829_Club_Fair_069

Emily Ciesielski, left, Jillian Weland, and Wilson Overfield all freshman from Omaha, look over the

230829_Club_Fair_105

Rachael Wagner, a Husker graduate and Virtual Incision employee, aligns the holes in a plate to bolt

230811_Virtual_Incision_074

The robotic arm inside the case that will house it in its trip into space is bolted onto a shake tab

230811_Virtual_Incision_413

Sean Crimmins, senior in engineering, loads the robotic arm into its case before the shake test. Vir

230811_Virtual_Incision_177

Sean Crimmins (from left), a senior mechanical engineering major; Erika Smith, a recent Husker gradu

230811_Virtual_Incision_446

The robotic arm inside the case that will house it in its trip into space is bolted onto a shake tab

230811_Virtual_Incision_369

Cody Stolle (center) evaluates small car suspension components in a load frame with students Gnyarie

230727_Stolle_071

Gnyarienn Selva Kumar, left, and Doreen Rahman work on setting up a strut for a compression test. Bo

230727_Stolle_100

Cody Stolle, Research Assistant Professor, Midwest Roadside Safety Facility, stands in front of a cr

230727_Stolle_108

Doreen Rahman sets up a compression test for a concrete sample. She is a masters student in mechanic

230727_Stolle_055

Cody Stolle, right, and Gnyarienn Selva Kumar work on setting up a strut for a compression test whil

230727_Stolle_069

Cody Stolle, Research Assistant Professor Midwest Roadside Safety Facility, stands in front of a vid

230727_Stolle_102

Cody Stolle, Research Assistant Professor, Midwest Roadside Safety Facility, stands in front of a cr

230727_Stolle_109

Gnyarienn Selva Kumar works on setting up a strut for a compression test while Doreen Rahman does th

230727_Stolle_049

Cody Stolle (center) evaluates small car suspension components in a load frame with students Gnyarie

230727_Stolle_074

Cody Stolle, Research Assistant Professor, Midwest Roadside Safety Facility, stands in front of a cr

230727_Stolle_107

Cody Stolle, Research Assistant Professor Midwest Roadside Safety Facility, stands in front of a vid

230727_Stolle_112

Nebraska Engineering researchers (from left) Yongfeng Lu, Bai Cui, Piyush Grover, and Keegan Moore a

230627_DEPSCoR_025

Yongfeng Lu is one of the mechanical and materials engineering researchers at UNL are among the 28 i

230627_DEPSCoR_078

Piyush Grover is one of the mechanical and materials engineering researchers at UNL who have been aw

230627_DEPSCoR_048

Bai Cui is one of the mechanical and materials engineering researchers at UNL who have been awarded

230627_DEPSCoR_068

Concrete is poured into a barrier being tested at the Midwest Roadside Safety Facility for the State

230605_MwRSF_143_0

Concrete is poured into a barrier being tested at the Midwest Roadside Safety Facility for the State

230605_MwRSF_189

Concrete is poured into a barrier being tested at the Midwest Roadside Safety Facility for the State

230605_MwRSF_218_0

Concrete is poured into a barrier being tested at the Midwest Roadside Safety Facility for the State

230605_MwRSF_273

A cable system for highway medians at the Midwest Roadside Safety Facility. Photo used for 2022-2023

230605_MwRSF_015_0

Husker Cody Stolle (right), Josh Steelman (center) and Ronald Faller lean against a guardrail develo

230605_MwRSF_039

From left: Cody Stolle, Josh Steelman and Ron Faller lean against a sled connected to a ground ancho

230605_MwRSF_061_0

Christopher Charroin connects monitor cables that will be used to record data from a test of a sled

230605_MwRSF_068

A cable system for highway medians at the Midwest Roadside Safety Facility. Photo used for 2022-2023

230605_MwRSF_124_0

Concrete is poured into a barrier being tested at the Midwest Roadside Safety Facility for the State

230605_MwRSF_143

Concrete is poured into a barrier being tested at the Midwest Roadside Safety Facility for the State

230605_MwRSF_204_0

Concrete is poured into a barrier being tested at the Midwest Roadside Safety Facility for the State

230605_MwRSF_218