Digital Photo Archive | University of Nebraska–Lincoln

Skip to main content

A slide sample is positioned under a microscope. Mechanical and Materials Engineering photo shoot. N

Engineering photoshoot in Mechanical and Materials Engineering in Nebraska Hall. November 22, 2019.

The demolition of the LINK which connects Scott Engineering Center at left and Nebraska Hall at righ

191204_Link_004

Professor Shudipto Dishari is synthesizing new polymers targeting to make the ions move faster at po

180315_Dishari_090

Ron Faller, left, and Bob Bielenberg, right, explain various test areas of the facility to the NASCA

180605_MwRSF_0899

Rebecca Wach and Fei San Lee examine a sample in Rebecca Wach's Chase Hall lab. Rebecca Wachs lab

181102_Wachs_080_0

Kiewit CEO Bruce Grewcock gives remarks at the announcement of the naming of Kiewit Hall, the new Co

190916_Kiewit_Hall_021

Lab samples lined up on the counter. Mechanical and Materials Engineering photo shoot. November 5, 2

A diverse collection of innovative food and bio-based materials, including hollow solid lipid micro-

241213_Ciftci_100

Engineering photoshoot in Mechanical and Materials Engineering in Nebraska Hall. November 22, 2019.

NSF CAREER winner Prahalada Rao research focuses on sensor-based monitoring and diagnosis of complex

Bob Bielenberg, right, explains the new highway barrier being tested to the media and the NASCAR tou

180605_MwRSF_0957

David Lillyman talks with Rebecca Wach in the Chase Hall lab. Rebecca Wachs lab in Chase Hall. The N

181102_Wachs_203_0

Kiewit CEO Bruce Grewcock gives remarks at the announcement of the naming of Kiewit Hall, the new Co

190916_Kiewit_Hall_062

Zahra Ahmadi, a PhD student, works in the Scott Engineering Center. Mechanical and Materials Enginee

Engineering photoshoot in Mechanical and Materials Engineering in Nebraska Hall. November 22, 2019.

A truck is crashed in to a bull-nose barrier for use in medians to protect cars from overpass column

180605_MwRSF_1087

Gustavo Diaz-Olguir shows his results of testing nano treated fabric to Soham Patel, a UNL computer

190619_STEM_Mentor_019

Othmer Hall and area across 17th Street to be built up as part of phase 2 of the college's construct

From left: Chancellor Ronnie Green, College of Engineering Dean, Lance Perez and Kiewit CEO Bruce Gr

190916_Kiewit_Hall_132

Graduate students Zahra Ahmadi and Mark Anderson, work in the Scott Engineering Center. Mechanical a

Engineering photoshoot in Mechanical and Materials Engineering in Nebraska Hall. November 22, 2019.

A truck is crashed in to a bull-nose barrier for use in medians to protect cars from overpass column

180605_MwRSF_1091

Soham Patel, a UNL computer science major, uses Beam technology to wheel around the class being held

190619_STEM_Mentor_106

From left: Professor Christine Wittich, Aleece Barnard, senior in civil engineering, Khalid Saifulla

190723_Shake_004

Students in Mark Bauer ECEN 102 - Introduction to Electrical Engineering class work on small robots

191120_ECEN_204

Engineering photoshoot in Mechanical and Materials Engineering in Nebraska Hall. November 22, 2019.

Shane Farritor, Virtual Incision surgical robot photographed in the group's Nebraska Innovation Cent

180411_Incision_027

A truck is crashed in to a bull-nose barrier for use in medians to protect cars from overpass column

180605_MwRSF_1097

Students write down the science terms they are learning about so they can write their reports. Eleme

190619_STEM_Mentor_144

Yañez Gonzalez from Anasco, Puerto Rico, adjusts her test column under the supervision of Professor

190723_Shake_221

Students in Mark Bauer ECEN 102 - Introduction to Electrical Engineering class work on small robots

191120_ECEN_224

Engineering photoshoot in Mechanical and Materials Engineering in Nebraska Hall. November 22, 2019.

Test of bull-nose barrier for use in medians to protect cars from overpass columns. Test was at univ

180605_MwRSF_1265

Professor Christine Wittich discusses the column being tested with Yañez Gonzalez from Anasco, Puer

190723_Shake_261

Nathan Simms is conducting drone research as part of Nebraska's inaugural FYRE program. Nathan, a fr

190925_Drone_028

Students in Mark Bauer ECEN 102 - Introduction to Electrical Engineering class work on small robots

191120_ECEN_456

An air vent is carved into the ceiling of the cave. Professor Ricky Wood uses LIDAR to digitally map

191122_Robbers_Cave_029

Test of bull-nose barrier for use in medians to protect cars from overpass columns. Test was at univ

180605_MwRSF_0001

Nathan Simms is conducting drone research as part of Nebraska's inaugural FYRE program. Nathan, a fr

190925_Drone_076

Students in Mark Bauer ECEN 102 - Introduction to Electrical Engineering class work on small robots

191120_ECEN_619

From upper left: Yijun Liao, Professor Ricky Wood and Dylan Downes raise a LIDAR unit to produce a 3

191122_Robbers_Cave_179

Test of bull-nose barrier for use in medians to protect cars from overpass columns. Test was at univ

180605_MwRSF_0028

Students in Mark Bauer ECEN 102 - Introduction to Electrical Engineering class work on small robots

191120_ECEN_783

Names and drawings fill the walls of the cave. Professor Ricky Wood uses LIDAR to digitally map Robb

191122_Robbers_Cave_298

Test of bull-nose barrier for use in medians to protect cars from overpass columns. Test was at univ

180605_MwRSF_0257

Eric Le and Vy Doan, students in the department of Computer Science and Engineering, are developing

190607_UCARE_News_027_0

Students working in a lab in the Scott Engineering Center. Mechanical and Materials Engineering phot