Digital Photo Archive | University of Nebraska–Lincoln

Skip to main content

Aaron Nix and Matthew Strasburger look over camera angles while filming the Nebraska Innovation Stud

Filming Nebraska Innovation Studios welding robot. Behind the scenes photo for the university's new

A welding helmet rests on the robotic welding table at Nebraska Innovation Studios. Behind the scene

Filming Nebraska Innovation Studios welding robot. Behind the scenes photo for the university's new

While Chira Khudhur, left, and Bella Thomas swing pendulums, Christine Wittich, Assistant Professor

240624_MATC_STEM_095

Mida DeAnda builds her tower to be tested on the shake table. Sovereign Native Youth STEM Leadership

240624_MATC_STEM_305

Christine Wittich, Assistant Professor in Civil and Environmental Engineering, explains why the poin

240624_MATC_STEM_486

Eden Freemont watches water slowly drip through a filter to improve its quality during a group’s E

240624_MATC_STEM_192

Mida DeAnda builds her tower to be tested on the shake table. Sovereign Native Youth STEM Leadership

240624_MATC_STEM_330

Christine Wittich, Assistant Professor in Civil and Environmental Engineering, explains why the poin

240624_MATC_STEM_518

Christine Wittich, Assistant Professor in Civil and Environmental Engineering, helps Eve Chavez buil

240624_MATC_STEM_248

Zach Abourezk, center and Mike Cayou, Jr., watch water slowly drip through a filter to improve its q

240624_MATC_STEM_350

Students watch as their tall building design is tested on the shake table. Sovereign Native Youth ST

240624_MATC_STEM_559

Travis Ray from Nebraska Innovation Studios is teaching drone classes so people can get their p107 l

240618_NIS_Drone_052

Taryn Miller, a senior in agriculture education from Amherst, Nebraska, ducks as the drone she is le

240618_NIS_Drone_695

Travis Ray from Nebraska Innovation Studios dissects aeronautical sectional charts so the future dro

240618_NIS_Drone_020

Concentration shows on Nick Restau’s face as he tries to pilot a small UAV through an obstacle cou

240618_NIS_Drone_384

A small UAV lands on the hand of Brandon Mowinkel, a teacher at Milford Public Schools. Travis Ray f

240618_NIS_Drone_782

Nick Restau from Milford Public Schools listens as Travis Ray from Nebraska Innovation Studios goes

240618_NIS_Drone_010

Rebecca Wulf (left), who graduated in agriculture education and will teach this fall at Lakeview Com

240618_NIS_Drone_555

A robotic welder at Nebraska Innovation Studio welds a Nebraska N to a cutout in the shape of Nebras

240314_NIC_Welder_095

A robotic welder at Nebraska Innovation Studio welds a Nebraska N to a cutout in the shape of Nebras

240314_NIC_Welder_041

Jacob Hansen, with ALA Engineering and a Nebraska alumnus, and Kunjan Theo Joseph, with the UNL MAAR

240220_Innovation_Studios_134_1

A robotic welder works its way around a metal sculpture welding in spots programmed into its compute

240220_Innovation_Studios_492_0

A robotic arm is programmed to stack blocks at Nebraska Innovation Studio. The robot’s programming

240220_Innovation_Studios_324_1

A metal sculpture that the robotic arm welded raised “N”. Nebraska Innovation Studio is working

240220_Innovation_Studios_584_0

John Strope is a program coordinator for Innovation Studio's robotics program. Nebraska Innovation S

240220_Innovation_Studios_368_0

The laser cutter completing the student’s design. Architecture design professor Aziza Cyamani is d

221030_Furniture_Innovation_021

Iowa State professor Chris Martin, right, helps student Thomas Gerees as he cuts his project with th

221030_Furniture_Innovation_029

Thomas Gerees uses the angel grinder on his project. Architecture design professor Aziza Cyamani is

221030_Furniture_Innovation_010

Students clean up the saw dust in the shop. Architecture design professor Aziza Cyamani is doing a w

221030_Furniture_Innovation_024

A buildup of wood shavings from the band saw. Architecture design professor Aziza Cyamani is doing a

221030_Furniture_Innovation_034

Students Elizabeth Loftus (left) and Caroline Gomel (right) begin assembly of their plant stand. Arc

221030_Furniture_Innovation_016

Iowa State professor Chris Martin goes over a sketch idea with a student. Architecture design profes

221030_Furniture_Innovation_027

Aziza Cyamani, assistant professor of product design (left), students Elizabeth Loftus, Thomas Geree

221030_Furniture_Innovation_035

Jerry Reif (center) speaks with Bay High students outside the woodshop in Nebraska Innovation Studio

221020_BayHigh_0199

A Bay High student cuts out a vinyl sticker using an X-Acto knife. Bay Highschool students tour Inno

221020_BayHigh_0197

Tours of Nebraska Innovation Studio, the makerspace at NIC. Bluegrass Festival at Nebraska Innovatio

220810_NIC_Bluegrass_009

Tours of Nebraska Innovation Studio, the makerspace at NIC. Bluegrass Festival at Nebraska Innovatio

220810_NIC_Bluegrass_013

Tours of Nebraska Innovation Studio, the makerspace at NIC. Bluegrass Festival at Nebraska Innovatio

220810_NIC_Bluegrass_010

Tours of Nebraska Innovation Studio, the makerspace at NIC. Bluegrass Festival at Nebraska Innovatio

220810_NIC_Bluegrass_016

Tours of Nebraska Innovation Studio, the makerspace at NIC. Bluegrass Festival at Nebraska Innovatio

220810_NIC_Bluegrass_006

Tours of Nebraska Innovation Studio, the makerspace at NIC. Bluegrass Festival at Nebraska Innovatio

220810_NIC_Bluegrass_012

Max Wheeler with Nebraska Innovation Studio explains how the laser cutter works. 2022 MATC/NCIA Sove

220630_Native_STEM_321

Jayquin LaPlante works on his design. 2022 MATC/NCIA Sovereign Native Youth STEM Leadership Academy.

220630_Native_STEM_015

Max Wheeler with Nebraska Innovation Studio discusses how to make the student’s designs work well

220630_Native_STEM_090

Alana Denney holds up her design which was laser cut out of a piece of fabric. 2022 MATC/NCIA Sovere

220630_Native_STEM_412

Academy mentor Shiloh King talks about the designs with the students. 2022 MATC/NCIA Sovereign Nativ

220630_Native_STEM_020